Redmi Note 9S or 9 Pro is getting its April 2020 Security Patch in the new MIUI update. The new update comes with the version number V11.0.6.0.QJWMIXM and weighs around 2.2 GB. Aside from the Security Patch, the update also fixes the Display issue.

The update is rolling out to random users, mainly to those users are who are enrolled in the Beta program. After confirming that no major bug exists in the ROM, the update will be pushed to the public. You can check the update in the Software Updater app in the About Phone section. However, if you can’t wait for the public release, then you can download either the recovery package or the OTA package from this post and install it manually.

Speaking of Redmi Note 9 Pro, it is powered by the Qualcomm SM7125 Snapdragon 720G with 4 or 6 GB of RAM. It embraces a 6.67 inches LCD panel with a resolution of 1080 x 2400 pixels. Coming to the cameras, it houses a Quad-camera setup on the back that consists of a 48 MP primary sensor with a secondary Ultrawide, macro, and depth sensors. On the front, a 16 MP lens is present for selfies. It is fueled by a massive 5020 mAh battery which supports 18W fast charging.

Table of Contents

1 Changelog:
2 Download MIUI V11.0.6.0.QJWMIXM for Redmi Note 9S / 9 Pro
3 How to Flash the New Update on Redmi Note 9S/9 Pro
- - 3.0.1 Recovery Version: Using Updater
  - 3.0.2 Fastboot Method (Manual)

Changelog:

Attention
- Optimization: Issues with the display
System
- Updated Android Security Patch to April 2020. Increased system security.

Download MIUI V11.0.6.0.QJWMIXM for Redmi Note 9S / 9 Pro

Recovery Package: Download

OTA Package to Upgrade from V11.0.5.0: Download

Fastboot Package: Download

Downlink Link Source

How to Flash the New Update on Redmi Note 9S/9 Pro

Recovery Version: Using Updater

If you want to Upgrade your MIUI then Use this Method. Make sure to Download the OTA package only, Fastboot ROM will not work with Updater.

Step 1: Unlock the Recovery options to manually install the Update. Open the Updater app and tap on MIUI logo 7-8 times.

Step 2: Download the OTA package given above, and Place it in /downloaded_rom folder of Internal Storage of your Device

Step 3: Launch the Updater app and Click on three dots on the right corner, click on “Choose Update Package”

Step 4: Select the file which you placed in /downloaded_rom. The installation will begin and the device will automatically boot into new MIUI.

Done! You have flashed the update for Redmi Redmi Note 9S/ 9 Pro

Fastboot Method (Manual)

This Method needs an Unlocked Bootloader. If your Device is locked then go here and Unlock it.

Download the MI Flash tool from here and install it.

Download the Fastboot ROM given above.

Flash Firmware Fastboot ROM by Miflash Tool

Step 1: Decompress the Downloaded ROM file

Step 2: Boot the Redmi Note 9S/9 Pro into Fastboot mode by pressing Volume down + Power Button at the same time and Connect it to PC via USB Cable

Step 3: Open the Mi flash tool and in the Address bar, Paste the path of Decompressed ROM file. You can copy the Path by going into the folder and click on the Top bar.

Step 4: After Pasting the Path of decompressed ROM file, Click on “Refresh” button and After that click on “Flash” Button

This will flash the Stock Firmware for Redmi Note 9S/9 Pro

Tags: MIUI Update Redmi Note 9 Pro Redmi Note 9S